FLENDER N-EUPEX DK
The Soft Solution for Hard Applications
Double-cardanic design for sustainable success:
- Higher radial and angular offset
- Significantly lower restoring forces
- More damping due to two elastomer joints
- Lower torsional stiffness
- Fail-safe design of the sleeve
Your advantage: Reduced load on adjacent machine components
Split hub (G-hub) underlines the service friendliness:
- Two half-shells can be separated so that the coupled machines do not have to be moved during assembly or disassembly of the N-EUPEX DK coupling
- When the clamping screws are tightened, the half-shells are centered by means of the feather key which ensures that the halves are clearly positioned in relation to each other
Your advantage: Simplified assembly
Extension of the modular principle of N-EUPEX:
- Adaptation of the spacer length of the N-EUPEX DK to the customer's design is possible
- Increased bore capacity through the implementation of a jumbo hub
- Customer-specific shaft-hub connections due to a new steel hub for 10 sizes
Your advantage: Specific adaptation of the coupling to your application
N-EUPEX DK IN NUMBERS:
10
Sizes
48 - 2,300 Nm
Nominal torque range
5,500 - 3,000 min-1
Rotation speed
-30 to +80 °C
Temperature range
1.0 - 3.1 mm
Radial offset
20 - 150 mm
Bore capacity
- All figures at a glance also in the N-EUPEX TechReport Download N-EUPEX TechReport
Increased performance and bore capacity for all types of the N-EUPEX series!
For more information click here.
Receive further information on N-EUPEX in free TechReport with the content:
- The new type DK
- Performance increase of the entire series
- Functionality of elastomers
